E30-170T27D ( SI4463, 2.0km, UART, 148~173.5MHz, 10~20dBm, 1k~25kbps, SMA-K ) Wireless Module

EBRF0002

New product

31,200 Ks

More info

Detail about E30-170T27D Wireless Module

E30-170T27D is a 27dBm wireless transceiver module. It operates at 148-173.5MHz, provides an easy way to use. Due to the low frequency, the module features strong penetration and diffraction ability. It is highly recommended for the complicated situations with obstacles.

Specifications

  • IC : SI4463
  • Frequency : 148~173.5MHz
  • Power : 18~27dBm
  • Distance : 5.0km
  • Interface : UART

RF Parameter Value
Remark
Working frequency
148~173.5 MHz

Default:  170MHz

Transmitting power 18~27 dBm

Default:  27dBm(About 500mW)

Receiving sensitivity -121 dBm

Air data rate: 5kbps

Air data rate 1k~25kbps

Default: 5kbps

Test distance 5000m

In open and clear air, with maximum power, 5dBi antenna gain, height of 2m,

air data rate: 2.4kbps

Hardware Parameter Value
Remark

Size

24 * 43 mm

Without SMA

Antenna type

SMA-K

   

Communication interface

UART

Baud rate: 1200~115200, default: 9600

Package

DIP

   

Buffer

512  bytes buffer

Automatically sub-packaging with 58 bytes per package

Electronic parameter Min. Typ. Max. Unit Condition
Power supply
3.3 5.0 5.2 V
Communication level 2.5 3.3 3.6 V
Transmitting current
370 400 440 mA 27dBm(500mW)
Receiving current
15
16 17 mA
Sleep current
4
5 6 μA
Operating temperature
-40 20
+85
Operating humidity
10 60
90 %
Storage temperature
-40 20
+125

E32-TTL-1W_Size

Pin No
Pin Item Pin Direction Pin Application
1 M0

Input

(weak pull-up)

   Work with M1& decide the four operating modes. (Floating is not allowed, can be ground)
2 M1

Input

weak pull-up)
   Work with M0 & decide the four operating modes. (Floating is not allowed, can be ground)
3 RXD Input

   TTL UART inputs, connects to external TXD (MCU, PC) output pin.

   Can be configured as open-drain or pull-up input.

4 TXD Output

   TTL UART outputs, connects to external RXD (MCU,PC) input pin.

   Can be configured as open-drain or push-pull output

5 AUX Output

   To indicate module's working status & wakes up the external MCU. During the procedure

   of self-check initialization, the pin outputs low level. Can be configured as open-drain

   output or push-pull output. (Floating is allowed)

6 VCC Input    Power supply 2.8V~5.5V DC
7 GND Input    Ground
8 Fixing hole    Fixing hole
9 Fixing hole    Fixing hole
10 Fixing hole    Fixing hole
11 Fixing hole    Fixing hole

E30证书-EN

E50-TTL-500

E30(170T20D)y
特点
应用标题_02
智能抄表-EN (1)
智能家庭_02
智能门锁-EN (4)
智能农业_11
工业遥控-EN (9)
温湿度传感器_03



23 other products in the same category: