E32-170T30D ( SX1278, 8.0km, UART, 160~173.5MHz, 21~30dBm, 0.3k~9.6kbps, SMA-K ) Wireless Module

EBRF0011

New product

45,600 Ks

More info

Detail about E32-170T30D Wireless Module

E32-170T30D is a 1W wireless transceiver module with LoRa spread-spectrum technology,operates at 160 ~ 173.5MHz,based on original imported SX1278 RFIC from SEMTECH,transparent transmitting is available,TTL level. it is compatible for 3.3V and 5V voltages (4.75V ~ 5.5V is recommended).

Specifications

  • IC : SX1278
  • Frequency : 160~173.5MHz
  • Power : 21~30dBm
  • Distance : 8.0km
  • Interface : UART

RF Parameter Value
Remark
Working frequency
160~173.5 MHz

Default: 170MHz

Transmitting power 21~30 dBm

Default: 30dBm(About 1W

Receiving sensitivity -147 dBm

Air data rate: 0.3kbps

Air data rate 0.3k~9.6kbps

Default: 2.4kbps

Test distance 8000 meter

In open and clear air, with maximum power, 5dBi antenna gain, height of 2m,

air data rate: 2.4kbps

Hardware Parameter Value
Remark
Size
24 * 43 mm

Without SMA  

Antenna type SMA-K

   

Communication interface UART

Baud rate: 1200~115200, default: 9600

Package DIP

   

Buffer 512 bytes buffer

Automatically sub-packaging with 58 bytes per package

Electronic parameter Min. Typ. Max. Unit Condition
Power supply
3.3 5.0 5.2 V
Communication level 2.5 3.3 3.6 V
Transmitting current

630

680 750 mA 30dBm(1W)
Receiving current 21
22 23 mA
Sleep current 4 5 6 μA
Operating temperature -40 20
+85
Operating humidity 10 60
90 %
Storage temperature -40 20
+125

E32-TTL-1W_Size

Pin No
Pin Item Pin Direction Pin Application
1 M0

Input

(weak pull-up)

   Work with M1& decide the four operating modes. (Floating is not allowed, can be ground)
2 M1

Input

weak pull-up)
   Work with M0 & decide the four operating modes. (Floating is not allowed, can be ground)
3 RXD Input

   TTL UART inputs, connects to external TXD (MCU, PC) output pin.

   Can be configured as open-drain or pull-up input.

4 TXD Output

   TTL UART outputs, connects to external RXD (MCU,PC) input pin.

   Can be configured as open-drain or push-pull output

5 AUX Output

   To indicate module's working status & wakes up the external MCU. During the procedure

   of self-check initialization, the pin outputs low level. Can be configured as open-drain

   output or push-pull output. (Floating is allowed)

6 VCC Input    Power supply 3.3V~5.2V DC
7 GND Input    Ground
8 Fixing hole    Fixing hole
9 Fixing hole    Fixing hole
10 Fixing hole    Fixing hole
11 Fixing hole    Fixing hole

E32证书-EN


E44-TTL-1W

硬件E46-TTL-1W
LoRa
特点
应用标题_02
智能抄表_01
智能家庭-EN (2)
智能农业_11
智能油田-EN (12)
工业遥控_09
环境监测-EN (10)
温湿度传感器_03


23 other products in the same category: