E1-ML01DP4 ( nRF24L01P, 1.8km, SPI, 2.4~2.525GHz, 20dBm, 250k~2Mbps, PCB Antenna ) Wireless Module

EBRF0024

New product

7,200 Ks

More info

Detail about E1-ML01DP4 Wireless Module

E01-ML01DP4 is based on original imported nRF24L01P form Nordic in Norway. And equipped with 20dBm power amplifier chip imported from USA, which makes the transmitting power achieves 100mW (20dBm) while the receiving sensitivity enhanced by 10dB.

Specifications

  • IC : nRF24L01P
  • Frequency : 2.4~2.525GHz
  • Power : 20dBm
  • Distance : 1.8km
  • Interface : SPI

RF Parameter Value
Remark
Working frequency
2400~2525 MHz

Default:  2.4GHz (16MHz oscillator)

Transmitting power 20 dBm

Max. Power (100mW)

Receiving sensitivity -96 dBm

Air data rate: 250kbps

Air data rate 250k~2Mbps

Default: 250kbps

Test distance 1800m

In open and clear air, with maximum power, 5dBi antenna gain, height of 2m,

air data rate: 250kbps

Hardware Parameter Value
Remark

Size

15 * 27 mm

    Without SMA

Antenna type

PCB

   

Communication interface

SPI

Package

DIP

   

Electronic parameter Min. Typ. Max. Unit Condition
Power supply
2.0 3.3 3.6 V
Communication level 2.0 3.3 3.6 V
Transmitting current
100 110 120 mA 20dBm(100mW)
Receiving current
18
20 22 mA
Sleep current
0.5
1.0 2.0 μA
Operating temperature
-40 20
+85
Operating humidity
10 60
90 %
Storage temperature
-40 20
+125

E01-ML01DP4

Pin No
Pin item Pin direction Pin application
1 GND -
   Ground
2 VCC -    Power supply 2.0V-3.6VDC
3 CE Input    Chip enable
4 CSN Input    SPI chip select
5 SCK Input    SPI clock
6 MOSI Input    SPI master output slave input
7 MISO Output    SPI master input slave output
8 IRQ Output    Interrupt request.

英E01证书

E01-ML01DP4


硬件E01-ML01DP4
应用标题_02
RFID识别-EN (7)
工业遥控_09
VR设备-EN (6)
家用遥控_08
无人机-EN (13)


23 other products in the same category: