View larger

USB-Serial Adapter/Microcontroller CP2104, 5V/3.3V, Digital I/O, Micro-USB

Reference: RDYN0104

Condition: New product

Send to a friend

Send to a friend

USB-Serial Adapter/Microcontroller CP2104, 5V/3.3V, Digital I/O, Micro-USB

Recipient :

Name of your friend ^* :

E-mail address of your friend ^* :

^* Required fields

or Cancel
Print

More info

Details about USB-Serial Adapter/Microcontroller

This USB to UART Bridge is a module, base on Silicon Labs CP2104 UART bridge, and it is a good solution for connecting micro-controllers and other digital serial devices to PC.
For connecting to PC used micro-USB socket.
The device also features up to four GPIO signals that can be user-defined for status and control information. Direct access driver support is available through the Silicon Labs USBXpress driver set. See www.siliconlabs.com for the latest application notes and product support information for the CP2104.

This board uses 5V signal levels by default. For use 3.3V level, pls cut off the bridge for 5V of soldering pads on bottom side of board, and make soldering the pads for 3.3V
For get detail information of IC CP2104 USB-UART bridge, pls folow this link: http://www.silabs.com/products/interface/usb-bridges

Specifications

USB-TTL Serial adapter	CP2102
Power Out	3.3V-180mA 5V-180mA
Power IN. USB	5V
USB	Micro USB
Ports	18
Operating temperature	−40С°/+85С°
Length×Width	29×15.50mm